Klassik_B Matte Black Alloy Wheel

VW T4 (1990 – 2003) Klassik_B 17x8 Matte Black Alloy Wheel 

The delta4x4 classic for the VW T4! Distinctive off-road design in Matte Black with a robust beadlock style. Perfect for Transporter, Multivan or California.

The wheel impresses with its rugged appearance and high load capacity. The bolted beadlock design ring can be replaced in the event of damage and features the delta4x4 logo.

The delta4x4 classic! Black/Black! Matte!

The beadlock ring can be easily replaced in the event of damage and features the delta4x4 logo.

Requirements:

1. Only tires and wheels from the same manufacturer and of the same type are permitted on the front and rear. *) The required Speed Index must be taken from the vehicle documents.
If the tire pressure differs from the standard pressure, the driver must be informed accordingly (e.g. tire pressure sticker).

2. Due to the changed rolling circumference, the speedometer must be checked and, if necessary, recalibrated. Standard tires may only be used afterwards if the speedometer setting continues to comply with regulations.

For vehicles equipped with an EC control device, the registration of multiple tire sizes is only permitted if calibration has been carried out for all tire sizes.

3. The use of fine-link snow chains with a thickness of no more than 12 mm is permitted on the front wheels.

3a. The use of snow chains is not permitted.

4. The use of this tyre size is only permitted on vehicle versions up to a permissible axle load of 1,500 kg.

4a. The use of this tyre size is only permitted on vehicle versions up to a permissible axle load of 1,600 kg.

4b. The use of this tyre size is only permitted on vehicle versions up to a permissible axle load of 1,650 kg.

5. This wheel/tyre combination is only permitted in conjunction with the suspension lift kit from Taubenreuther in accordance with parts report 18-00156-CP-BWG-xx issued by TÜV SÜD Auto Service GmbH in its most current version for this vehicle type.

6. Sufficient wheel coverage must be provided at the wheel arches by fitting suitable parts or by other suitable measures. Depending on the vehicle's specification (e.g. lowered suspension, widened wheel arch covers, etc.), the wheel coverage may already be sufficient.

7. Sufficient clearance for the wheel/tire combination must be ensured by folding and/or modifying the rear wheel arch edges and plastic inner fenders along the entire length of the wheel arch edge.

8. For this tire size, approval from the respective tire manufacturer for use on a 7.5" rim width is required.

9. Sufficient clearance for the wheel/tire combination must be ensured by installing a sliding door spacer.

Product Safety Information