Klassik_B Matte Black Alloy Wheel

Tesla Model Y Klassik_B Matte Black Alloy Wheel 20x9.5

The delta4x4 classic for the Tesla Model Y! Striking off-road design in Matte Black with a robust beadlock style.

The wheel impresses with its massive appearance and high load capacity.

In the event of damage, the beadlock ring can be easily replaced and features the delta4x4 logo.

Conditions:

1. Only tires and wheels from the same manufacturer and of the same type are permitted on the front and rear axles.
   *) The required Speed Index must be taken from the vehicle documents.
   If the tire pressure differs from the standard pressure, the driver must be informed in an appropriate manner (tire pressure sticker, supplement to the owner's manual).
2. Sufficient wheel coverage must be provided at the front and rear wheel arches by installing suitable parts or taking other appropriate measures. Depending on the vehicle configuration (e.g. vehicle lowering, wheel arch extensions, etc.), the existing wheel coverage may already be sufficient.
3. Depending on the vehicle's basic equipment, speedometers with different distance-per-revolution values may be assigned to a standard tire size. When using a tire size that is not yet listed in the vehicle documents, speedometer calibration may therefore be required.
4. Sufficient clearance on the Front Axle must be ensured in accordance with the enclosed installation instructions.
5. This wheel/tire combination is only permitted with 30 mm wheel spacers from Hofmann GmbH, marking: SPV-A05-30, in accordance with certificate no.: 10-0224-A00-V11 issued by TÜV Pfalz on 15.10.2018 (30 mm thick). Tested strength: 1000 kg with a rolling circumference of 2400 mm. The supplied installation instructions must be observed!
6. Only permitted with the suspension lift from Delta 4x4 in accordance with TÜV parts certificate no.: 20-00070-CP-BWG-xx (30 mm lift), in the latest applicable version. The respective TÜV parts certificates must be presented during certification.
7. On vehicles with a tire pressure monitoring system (TPMS), the wheel sensors must be installed in the special wheels according to the manufacturer's instructions. After wheel installation, the system must be reinitialized according to the manufacturer's specifications.
8. The use of snow chains is not permitted.
9. The requirements of the guideline for testing special wheels for motor vehicles and their trailers (version dated 25.11.1998), in conjunction with VdTÜV Leaflet 751 “Assessment of Structural Modifications to M and N Vehicles with Particular Consideration of Operational Strength” (version 04/2021), are fulfilled.
   In particular, the following tests were carried out:
   Strength test in accordance with VdTÜV Leaflet 751 (version 04/2021)

Product Safety Information