Alloy Wheel Klassik_B Matt Black

 VW T4 (1990 – 2003) Alloy Wheel Klassik_B 17x8 Matt Black 

The delta4x4 classic for the VW T4! Striking off-road design in matt black with a rugged beadlock style. Perfect for the Transporter, Multivan or California.

The wheel impresses with its solid looks and high load capacity. The bolt-on beadlock design ring can be replaced in the event of damage and carries the delta4x4 logo.

The delta4x4 classic! Black/black! Matt! 

The beadlock ring is easy to replace in the event of damage and carries the delta4x4 logo.

Conditions:

1. Only tyres and wheels of one manufacturer and type are permitted at the front and rear. *) The required speed index can be found in the vehicle documents.
If the tyre inflation pressure differs from the standard pressure, the driver must be informed accordingly (e.g. by a tyre pressure sticker).

2. Due to the changed rolling circumference, the speedometer must be checked and readjusted if necessary. Standard tyres may only be used afterwards if the speedometer setting still
complies with the regulations.
On vehicles with an EC control device, the entry of several tyre sizes is only permitted if a calibration has been carried out for all tyre sizes.

3. The use of fine-link snow chains that do not add more than 12 mm is permitted on the front wheels.

3a. The use of snow chains is not permitted.

4. The use of this tyre size is only permitted on vehicle versions up to a permissible axle load of 1500 kg.

4a. The use of this tyre size is only permitted on vehicle versions up to a permissible axle load of 1600 kg.

4b. The use of this tyre size is only permitted on vehicle versions up to a permissible axle load of 1650 kg.

5. This wheel/tyre combination is only permitted in conjunction with the suspension lift kit from Taubenreuther in accordance with parts report 18-00156-CP-BWG-xx issued by TÜV SÜD Auto Service GmbH in its most current version for this vehicle type.

6. Sufficient wheel coverage must be provided at the wheel arches by fitting suitable parts or by other suitable measures. Depending on the vehicle's specification (e.g. lowered suspension, widened wheel arch covers, etc.), the wheel coverage may already be sufficient.

7. Clearance for the wheel/tyre combination must be ensured by rolling or reworking the rear wheel arch edges and the plastic inner wings along the entire length of the wheel arch edge.

8. For this tyre size, approval from the respective tyre manufacturer for the 7.5" rim width is required.

9. Sufficient clearance for the wheel/tyre combination must be ensured by fitting a sliding door wedge.

Product safety information